Filling machine for aggressive liquids

The aggressive liquid dosage and filling unit is made of the high molecular weight polypropylene; its capacity is 800 - 2000 bottles per hour


Read More...

Highly Chemical Resistant Fittings and Pumps

The products are intended for use with aggressive and neutral liquids and gases in the following industries: basic chemicals, chemical processing,   pharmaceuticals, cosmetics, maize processing, dairy processing, non-alchocolic beverages, alcoholic beverages, celulosis and paper, textile, energy and chemical treatment of water, waste water purification, watersupply, paints and varnishes,  detergents and washing agentse ...


Read More...

Stable fire-fighting systems

Above-ground hydrant, Foam pot, Roof cooling nozzles, Water curtain nozzle, Foam diverters, Spray water nozzles, Stable nozzles for heavy air foam, Electromagnetic diaphragm valves


Read More...

Separators

Polyethylene separators Euro - norm EN 858, for underground installation, with integrated sludge separator, with safety float against the spilling of mineral oil calibrated for fluid density 0.85 to 0.95 g/cm3, with coalescent filter that allows the residual oil content to be lower than 5 mg/l which is maximum allowed according to DIN EN 858.


Read More...

Three-piece ball valves

Simple construction and operation, a small installation space compared to the other valves, fast opening and closing by rotating the handle in 90°, a circular cross section with a full or narrow passage, a very small hydraulic resistance because there is no turning of flow line of the fluid, baukasten principle of building - easy maintenance and reduced cost of stocking spare parts, various material combinations offer the possibility of wide area of application.


Read More...

Chemical centrifugal pumps

The pumps are primarily intended for transmission of bases, acids, salt solutions and all other aggressive liquids the main pump material is resistant to. They can also be used for non-aggressive liquids (organic compounds, water and other)


Read More...

Two-piece ball valves

Two-piece ball valves with thread fit for nominal pressure PN 16, 25, 40 and 63, and at the request of the customer we produce PN 100 i 160 as well as Class 150, 300, 600, 800, 900, 1500. Operating temperature is limited by applying teflon (PTFE) as a sealing material up to max. 200°C. The area of application is very broad, so it includes their application and installation in the lines with non-aggressive and aggressive fluids in consultation with the manufacturer.


Read More...

Regulators without auxiliary energy

Regulator without auxiliary energy or pressure reducing valve for steam, water and gases, is applied in lines and plants under pressure to reduce the pressure of fluid flow. Pressure reducing valves can be used as individual, standalone components or as part of pressure reducing stations.


Read More...

Control valves

Materials: W.Nr.1.0619; W.Nr.1.4581; W.Nr.1.4408. Nominal pressures: DIN PN 16, 25, 40, 63, 100, 160. ANSI Class 150, 300, 600, 900. Nominal sizes: DN 15 - 300. Application: the processing industry for all aggressive and non-aggressive fluids up to 400º C.


Read More...
012345678

In Serbian market

NIS – GASPROM NEFT, Belgrade, Novi Sad
J.P. „SRBIJAGAS“,Novi Sad
HIDROELEKTRANA – ĐERDAP, Kladovo
TERMOELEKTRANA „Nikola Tesla“, Obrenovac
TERMOELEKTRANA – TOPLANA TE – TO, Novi Sad
TERMOELEKTRANA, Bor
MESSER – TEHNOGAS, Belgrade
LINDE GAS SRBIJE, Bečej
JP ŽELEZNICE SRBIJE, Belgrade
ŠINVOZ, Zrenjanin
VODOVOD I KANALIZACIJA, Belgrade
AZOTARA, Pančevo
HIP PETROHEMIJA, Pančevo
PANONIJA, Pančevo
LOLA UTVA, Pančevo
RTB, Bor
TIGAR TYRES, Pirot
UM – ING, Zrenjanin
DIJAMANT, Zrenjanin
JUGOREMEDIJA, Zrenjanin
CARNEKS, Vrbas
FABRIKA AKUMULATORA, Sombor
HEMOFARM, Vršac
BRIKSOL, Vršac
GALENIKA, Zemun
A.D. VRENJE, Belgrade
NARODNA BANKA – KOVNICA NOVCA, Belgrade
IHIS, Zemun
VEMONT, Belgrade
KOTEKS – VISKOFAN, Novi Sad
US – STEEL SRBIJA, Smederevo
KRUŠIK, Valjevo
ZORKA – NAMENSKA, Šabac
TERMOVENT SC, Temerin
REPRO – OPREMA, Belgrade
VLADEX, Belgrade
MIS – SISTEM, Novi sad

In foreign markets

PLANT GLOBAL INC, Tortola
PO „KIRIŠINEFTEORGSINTEZ“, Kirishi, Russain Federation
ADI TRADE, Žiri, Republic of Slovenia
RAFINERIJA ULJA – MODRIČA, Modriča, Republika Srpska
BIMAL, Brčko
VENTIL TRADE, Skopje, Republic of Macedonia
UŽ – USLUGE, Skopje, Republic of Macedonia

 
KB Armature Logo
KB Armature
Radnička 5, 11030 Belgrade, Republic of Serbia
Tel: +381 11 3557 541 Fax: +381 11 3550 097
office@kbarmature.rs